Metric Bolt Torque Chart
Metric bolt torque depends on size and class. A dry M10 class 8.8 bolt tightens to about 50 N·m at 75% of proof load.
Last verified October 5, 2026
Important. Starting values for general use. Follow the manufacturer's specification for critical joints, wheels and engines.
Starting torque
Metric bolt torque chart, classes 8.8, 10.9 and 12.9
Torque = K × diameter × clamp load, with clamp load at 75% of proof load (a reusable joint). K is 0.20 for dry threads and 0.15 for lubricated threads. Proof load is tensile stress area times proof strength: grade 2 at 55 ksi, grade 5 at 85 ksi, grade 8 at 120 ksi, and ISO classes 8.8, 10.9 and 12.9 at 580, 830 and 970 MPa. Stress area is π/4 × (D − 0.9743/TPI)² for inch threads and π/4 × (D − 0.9382 × pitch)² for metric.
| Bolt (size×pitch) | Stress area (mm²) | Class 8.8 clamp load (kN) | Class 8.8 dry (N·m) | Class 8.8 lubricated (N·m) | Class 8.8 dry (ft-lb) | Class 8.8 lubricated (ft-lb) | Class 10.9 clamp load (kN) | Class 10.9 dry (N·m) | Class 10.9 lubricated (N·m) | Class 10.9 dry (ft-lb) | Class 10.9 lubricated (ft-lb) | Class 12.9 clamp load (kN) | Class 12.9 dry (N·m) | Class 12.9 lubricated (N·m) | Class 12.9 dry (ft-lb) | Class 12.9 lubricated (ft-lb) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M6×1 | 20.1 | 8.8 | 11 | 8 | 8 | 6 | 12.5 | 15 | 11 | 11 | 8 | 14.6 | 18 | 13 | 13 | 10 |
| M8×1.25 | 36.6 | 15.9 | 25 | 19 | 19 | 14 | 22.8 | 36 | 27 | 27 | 20 | 26.6 | 43 | 32 | 31 | 24 |
| M10×1.5 | 58.0 | 25.2 | 50 | 38 | 37 | 28 | 36.1 | 72 | 54 | 53 | 40 | 42.2 | 84 | 63 | 62 | 47 |
| M12×1.75 | 84.3 | 36.7 | 88 | 66 | 65 | 49 | 52.5 | 126 | 94 | 93 | 70 | 61.3 | 147 | 110 | 109 | 81 |
| M14×2 | 115.4 | 50.2 | 141 | 105 | 104 | 78 | 71.9 | 201 | 151 | 148 | 111 | 84.0 | 235 | 176 | 173 | 130 |
| M16×2 | 156.7 | 68.2 | 218 | 164 | 161 | 121 | 97.5 | 312 | 234 | 230 | 173 | 114.0 | 365 | 274 | 269 | 202 |
| M20×2.5 | 244.8 | 106.5 | 426 | 319 | 314 | 236 | 152.4 | 610 | 457 | 450 | 337 | 178.1 | 712 | 534 | 525 | 394 |
| M24×3 | 352.5 | 153.3 | 736 | 552 | 543 | 407 | 219.4 | 1053 | 790 | 777 | 583 | 256.4 | 1231 | 923 | 908 | 681 |
How to use this chart
Find the bolt size and read across for each class in N·m and ft-lb, dry and lubricated. Values come from the formula torque equals nut factor times diameter times clamp load, with clamp load at 75% of proof load. Use the selector above to look up a single case.
Frequently asked questions
What is the torque for an M8 bolt?
A dry M8 class 8.8 bolt is about 26 N·m and about 19 N·m lubricated.
What is the torque for an M12 bolt?
A dry M12 class 8.8 bolt is about 88 N·m using this method.
How do I convert N·m to ft-lb?
Multiply by 0.7376. A bolt at 50 N·m is about 37 ft-lb.
Does a longer bolt need more torque?
No. Torque depends on diameter, thread and class, not on length.
Should I use thread locker with these values?
Thread locker lubricates the threads a little. Many makers publish separate values for it, so check the maker if the joint matters.
Explore the whole Calcs family here.
Tell us which value looks off and we will check it against the sources. Report an issue
Tell us what you looked for. Suggest a chart
Disclaimer. Starting values for general use. Follow the manufacturer's specification for critical joints, wheels and engines. Charts & Specs is an independent reference site. It is not affiliated with any manufacturer, standards body or code organization, and it uses brand and standard names only to identify what a value applies to.