How We Verify Our Charts

Every value on this site has to pass one of three tests before it is published. This page explains them, and what we do when sources disagree.

The two-source rule

A fixed value, such as a drill bit diameter, a conduit wall or a bolt wrench size, is published only when at least two independent sources print the same number, or when one manufacturer's or standards body's own page does. Independent means a different publisher with its own data, not a copy of the same table. Where a published list was only found in one place, we left the row out instead of guessing.

Computed charts

Some charts are worked out from a formula instead of copied. Wire gauge diameters, tap drill sizes, bolt torque, conduit fill, gas pipe capacity and voltage drop all use published formulas. For those, the formula is the source, and we still check the results against published charts. When the two differ, we say so on the page.

When sources disagree

Where manufacturers or charts print different numbers for the same item, we publish the most-cited value and add a note naming the others. NPT tap drills, some nail dimensions and metric bolt strength are examples. Insulated wire diameters differ between makers, so the conduit pages list each maker's value and use the largest, which gives the lower wire count.

What we leave out

We left out 144 individual values so far because only one source printed them or the sources could not be reconciled. A dash in a table means the value did not meet our rule. It never means zero. Pressure ratings on pipe, some 60°C aluminum ampacities and a few sandpaper grit equivalents are among the omissions.

What these pages are not

This is a reference site, not a code book. We do not reproduce the tables in the electrical or fuel gas codes. Where a calculator can be checked against a code table, we use the code table privately to test it and never publish it. The adopted code and the manufacturer's data always govern.

Corrections

If a value looks wrong, tell us on the report an issue page and say which row. We check it against the sources, and fix the page if it is wrong. Each page shows the date it was last verified.