Bolt Torque Chart

Torque depends on bolt size, grade and thread condition. A dry 3/8-16 grade 5 bolt, for example, tightens to about 31 ft-lb at 75% of proof load.

Last verified October 5, 2026

Important. Starting values for general use. Follow the manufacturer's specification for critical joints, wheels and engines.

Download PDF
Bolt torque selector

Starting torque

8 ft-lb

SAE bolt torque, coarse threads, grades 2, 5 and 8

Grade 2 stops at 3/4 inch.

Torque = K × diameter × clamp load, with clamp load at 75% of proof load (a reusable joint). K is 0.20 for dry threads and 0.15 for lubricated threads. Proof load is tensile stress area times proof strength: grade 2 at 55 ksi, grade 5 at 85 ksi, grade 8 at 120 ksi, and ISO classes 8.8, 10.9 and 12.9 at 580, 830 and 970 MPa. Stress area is π/4 × (D − 0.9743/TPI)² for inch threads and π/4 × (D − 0.9382 × pitch)² for metric.

Bolt (diameter-TPI)Stress area (in²)Grade 2 clamp load (lb)Grade 2 dry (ft-lb)Grade 2 lubricated (ft-lb)Grade 2 dry (N·m)Grade 2 lubricated (N·m)Grade 5 clamp load (lb)Grade 5 dry (ft-lb)Grade 5 lubricated (ft-lb)Grade 5 dry (N·m)Grade 5 lubricated (N·m)Grade 8 clamp load (lb)Grade 8 dry (ft-lb)Grade 8 lubricated (ft-lb)Grade 8 dry (N·m)Grade 8 lubricated (N·m)
1/4-200.03181,31354762,029861192,8641291612
5/16-180.05242,16311815113,342171324184,71925183325
3/8-160.07753,196201527204,940312342316,97444335944
7/16-140.10634,385322443336,777493767509,56870529571
1/2-130.14195,853493766509,04675571027712,77110680144108
9/16-120.18197,5057053957211,5991098214711116,375154115208156
5/8-110.22609,32397731329914,40815011320315320,340212159287215
3/4-100.334513,79617212923417521,32226720036127130,101376282510383
7/8-90.4617—————29,43542932258243741,556606455822616
1-80.6057—————38,61664448387365454,5179096811232924

Metric bolt torque, classes 8.8, 10.9 and 12.9

Bolt (size×pitch)Stress area (mm²)Class 8.8 clamp load (kN)Class 8.8 dry (N·m)Class 8.8 lubricated (N·m)Class 8.8 dry (ft-lb)Class 8.8 lubricated (ft-lb)Class 10.9 clamp load (kN)Class 10.9 dry (N·m)Class 10.9 lubricated (N·m)Class 10.9 dry (ft-lb)Class 10.9 lubricated (ft-lb)Class 12.9 clamp load (kN)Class 12.9 dry (N·m)Class 12.9 lubricated (N·m)Class 12.9 dry (ft-lb)Class 12.9 lubricated (ft-lb)
M6×120.18.81188612.5151111814.618131310
M8×1.2536.615.92519191422.83627272026.643323124
M10×1.558.025.25038372836.17254534042.284636247
M12×1.7584.336.78866654952.512694937061.314711010981
M14×2115.450.21411051047871.920115114811184.0235176173130
M16×2156.768.221816416112197.5312234230173114.0365274269202
M20×2.5244.8106.5426319314236152.4610457450337178.1712534525394
M24×3352.5153.3736552543407219.41053790777583256.41231923908681

How to use this chart

Use the selector to pick one bolt, grade and thread condition and read the starting torque, or scan the tables for every size. The values are calculated as torque equals nut factor times diameter times clamp load, with clamp load set at 75% of proof load. Dry threads use a nut factor of 0.20 and lubricated threads use 0.15. Treat the results as a starting point, and follow the maker for critical joints.

Frequently asked questions

What is the torque for a 1/2 inch grade 5 bolt?

A dry 1/2-13 grade 5 bolt comes to about 75 ft-lb, or about 56 ft-lb lubricated, using the method on this page.

How do you calculate bolt torque?

Torque equals K times the bolt diameter times the clamp load. K is the nut factor, 0.20 for dry threads and 0.15 for lubricated threads. Clamp load is 75% of the proof load for a joint you may reuse.

Should I lubricate bolt threads before torquing?

Only if the table you follow assumes it. Oil or anti-seize cuts friction, so the same torque will clamp harder. Using dry values on a lubricated bolt can overtighten it.

What is the difference between grade 5 and grade 8 bolts?

Grade 8 bolts are made from a stronger heat-treated steel with a higher proof strength of about 120 ksi against 85 ksi for grade 5. They tighten to a higher torque.

What do 8.8 and 10.9 mean on a metric bolt?

They are property classes. The first number times 100 is the minimum tensile strength in MPa, and the second number divided by 10 is the yield strength as a fraction of tensile, so 8.8 means 800 MPa tensile with yield at 80% of that.

Can I use these values for wheel lug nuts or engine parts?

No. Wheel, engine and structural fasteners have maker specifications that account for the joint, so use those instead.

Disclaimer. Starting values for general use. Follow the manufacturer's specification for critical joints, wheels and engines. Charts & Specs is an independent reference site. It is not affiliated with any manufacturer, standards body or code organization, and it uses brand and standard names only to identify what a value applies to.

Last verified October 5, 2026. How we verify explains our two-source rule and what we leave out.

Metric bolt strength is published two ways. Proof stress, which this page uses, is 580, 830 and 970 MPa for classes 8.8, 10.9 and 12.9 (Andrews Fasteners UK, EngiCalcsHub). Yield strength is a different number, 640, 940 and 1100 MPa (TR Fastenings, EngineeringToolbox.com, Fastener Insight). Older tables also print 640, 900 and 1080 MPa. We label each by what it is.

Sources used on this page
  • Portland Bolt
  • California Fastener
  • Andrews Fasteners UK
  • EngiCalcsHub
  • eFunda
  • MechaniCalc
  • Engineers Edge
  • EngineeringToolbox.com
  • Nordic Fastening Group
  • Optimas