Grade 8 Bolt Torque Chart
Grade 8 bolts have a proof strength of 120 ksi. A dry 1/2-13 grade 8 bolt tightens to about 106 ft-lb at 75% of proof load.
Last verified October 5, 2026
Important. Starting values for general use. Follow the manufacturer's specification for critical joints, wheels and engines.
Starting torque
Grade 8 bolt torque chart, coarse threads
Torque = K × diameter × clamp load, with clamp load at 75% of proof load (a reusable joint). K is 0.20 for dry threads and 0.15 for lubricated threads. Proof load is tensile stress area times proof strength: grade 2 at 55 ksi, grade 5 at 85 ksi, grade 8 at 120 ksi, and ISO classes 8.8, 10.9 and 12.9 at 580, 830 and 970 MPa. Stress area is π/4 × (D − 0.9743/TPI)² for inch threads and π/4 × (D − 0.9382 × pitch)² for metric.
| Bolt (diameter-TPI) | Stress area (in²) | Grade 8 clamp load (lb) | Grade 8 dry (ft-lb) | Grade 8 lubricated (ft-lb) | Grade 8 dry (N·m) | Grade 8 lubricated (N·m) |
|---|---|---|---|---|---|---|
| 1/4-20 | 0.0318 | 2,864 | 12 | 9 | 16 | 12 |
| 5/16-18 | 0.0524 | 4,719 | 25 | 18 | 33 | 25 |
| 3/8-16 | 0.0775 | 6,974 | 44 | 33 | 59 | 44 |
| 7/16-14 | 0.1063 | 9,568 | 70 | 52 | 95 | 71 |
| 1/2-13 | 0.1419 | 12,771 | 106 | 80 | 144 | 108 |
| 9/16-12 | 0.1819 | 16,375 | 154 | 115 | 208 | 156 |
| 5/8-11 | 0.2260 | 20,340 | 212 | 159 | 287 | 215 |
| 3/4-10 | 0.3345 | 30,101 | 376 | 282 | 510 | 383 |
| 7/8-9 | 0.4617 | 41,556 | 606 | 455 | 822 | 616 |
| 1-8 | 0.6057 | 54,517 | 909 | 681 | 1232 | 924 |
Grade 8 bolt torque chart, fine threads
| Bolt (diameter-TPI) | Stress area (in²) | Grade 8 clamp load (lb) | Grade 8 dry (ft-lb) | Grade 8 lubricated (ft-lb) | Grade 8 dry (N·m) | Grade 8 lubricated (N·m) |
|---|---|---|---|---|---|---|
| 1/4-28 | 0.0364 | 3,274 | 14 | 10 | 18 | 14 |
| 5/16-24 | 0.0581 | 5,226 | 27 | 20 | 37 | 28 |
| 3/8-24 | 0.0878 | 7,905 | 49 | 37 | 67 | 50 |
| 7/16-20 | 0.1187 | 10,684 | 78 | 58 | 106 | 79 |
| 1/2-20 | 0.1600 | 14,396 | 120 | 90 | 163 | 122 |
| 9/16-18 | 0.2030 | 18,268 | 171 | 128 | 232 | 174 |
| 5/8-18 | 0.2560 | 23,036 | 240 | 180 | 325 | 244 |
| 3/4-16 | 0.3730 | 33,566 | 420 | 315 | 569 | 427 |
| 7/8-14 | 0.5095 | 45,853 | 669 | 502 | 907 | 680 |
| 1-12 | 0.6630 | 59,674 | 995 | 746 | 1348 | 1011 |
How to use this chart
Find the bolt size in the coarse or fine table and read dry and lubricated torque in ft-lb and N·m, with the clamp load beside it. The formula and nut factors are listed above the table. Grade 8 bolts have six radial marks on the head.
Frequently asked questions
How do I know a bolt is grade 8?
A grade 8 hex bolt has six radial lines stamped on the head.
What is the torque for a 3/8-16 grade 8 bolt?
About 44 ft-lb dry and 33 ft-lb lubricated, using this method.
Can I reuse grade 8 bolts?
Many makers say to replace them in critical joints once they have been tightened close to proof load. The values here use 75% of proof load, which is suited to reusable joints.
Should fine thread grade 8 bolts get more torque?
Slightly. Fine threads have a larger stress area, so they carry more clamp load, and the table shows the difference.
Is a grade 8 bolt always better than grade 5?
Not always. Grade 8 is stronger but less ductile, so it can be the wrong choice where a bolt must stretch before it breaks.
Explore the whole Calcs family here.
Tell us which value looks off and we will check it against the sources. Report an issue
Tell us what you looked for. Suggest a chart
Disclaimer. Starting values for general use. Follow the manufacturer's specification for critical joints, wheels and engines. Charts & Specs is an independent reference site. It is not affiliated with any manufacturer, standards body or code organization, and it uses brand and standard names only to identify what a value applies to.