Socket Size Chart

A socket size chart matches SAE and metric sockets. A 1/2 inch socket is 12.7 mm, so a 13 mm socket is a close fit.

Last verified October 5, 2026

Download PDF
Socket size converter

Nearest socket in the other system

7/16"

True-size hex outlines Print at 100% (no scaling). Hold a bolt head against its outline, measuring across the flats.
8 mm
10 mm
11 mm
12 mm
13 mm
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
21 mm
22 mm
24 mm
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1 inch

SAE socket sizes, 1/4 to 1-1/2 inch

The nearest metric socket and how far off it is. A negative number means the metric socket is smaller than the bolt head, so it will not fit.

SAE sizeDecimal (in)MillimetersNearest metric socketTypical bolt it fits
1/4"0.25006.356 mm (-0.35)—
5/16"0.31257.948 mm (+0.06)—
3/8"0.37509.5210 mm (+0.48)—
7/16"0.437511.1111 mm (-0.11)1/4 bolt
1/2"0.500012.7013 mm (+0.30)5/16 bolt
9/16"0.562514.2914 mm (-0.29)3/8 bolt
5/8"0.625015.8816 mm (+0.12)7/16 bolt
11/16"0.687517.4617 mm (-0.46)—
3/4"0.750019.0519 mm (-0.05)1/2 bolt
13/16"0.812520.6421 mm (+0.36)—
7/8"0.875022.2222 mm (-0.22)—
15/16"0.937523.8124 mm (+0.19)5/8 bolt
1"1.000025.4025 mm (-0.40)—
1-1/16"1.062526.9927 mm (+0.01)—
1-1/8"1.125028.5729 mm (+0.43)3/4 bolt
1-3/16"1.187530.1630 mm (-0.16)—
1-1/4"1.250031.7532 mm (+0.25)—
1-5/16"1.312533.3433 mm (-0.34)7/8 bolt
1-3/8"1.375034.9235 mm (+0.08)—
1-7/16"1.437536.5137 mm (+0.49)—
1-1/2"1.500038.1038 mm (-0.10)1 bolt

Metric socket sizes, 4 to 32 mm

The nearest 1/16 inch socket and how far off it is.

Metric sizeDecimal (in)Nearest SAE socketTypical ISO bolt it fits
4 mm0.15753/16" (+0.76 mm)—
5 mm0.19693/16" (-0.24 mm)—
6 mm0.23621/4" (+0.35 mm)—
7 mm0.27561/4" (-0.65 mm)M4
8 mm0.31505/16" (-0.06 mm)M5
9 mm0.35433/8" (+0.52 mm)—
10 mm0.39373/8" (-0.48 mm)M6
11 mm0.43317/16" (+0.11 mm)—
12 mm0.47241/2" (+0.70 mm)—
13 mm0.51181/2" (-0.30 mm)M8
14 mm0.55129/16" (+0.29 mm)—
15 mm0.59069/16" (-0.71 mm)—
16 mm0.62995/8" (-0.12 mm)M10
17 mm0.669311/16" (+0.46 mm)—
18 mm0.708711/16" (-0.54 mm)M12
19 mm0.74803/4" (+0.05 mm)—
20 mm0.787413/16" (+0.64 mm)—
21 mm0.826813/16" (-0.36 mm)M14
22 mm0.86617/8" (+0.22 mm)—
23 mm0.90557/8" (-0.78 mm)—
24 mm0.944915/16" (-0.19 mm)M16
25 mm0.98431" (+0.40 mm)—
26 mm1.02361" (-0.60 mm)—
27 mm1.06301-1/16" (-0.01 mm)M18
28 mm1.10241-1/8" (+0.57 mm)—
29 mm1.14171-1/8" (-0.43 mm)—
30 mm1.18111-3/16" (+0.16 mm)M20
31 mm1.22051-1/4" (+0.75 mm)—
32 mm1.25981-1/4" (-0.25 mm)—

How to use this chart

Find the size you have and read across to the nearest socket in the other system and how far off it is. A negative number means the other socket is smaller than the bolt head, so it will not fit. Use the converter above for a quick answer, and print the page at 100% to hold bolt heads against the true-size hex outlines.

Frequently asked questions

Can I use a 13 mm socket on a 1/2 inch bolt?

It will work, but 13 mm is 0.5118 inch against 0.5000 inch for the bolt head, so expect a little slop.

What is the SAE equivalent of 10 mm?

10 mm is 0.3937 inch, which sits between 3/8 inch (9.525 mm) and 7/16 inch (11.113 mm).

What size socket fits a 3/8 inch bolt?

A 9/16 inch socket fits a standard 3/8 inch hex bolt.

What size socket fits an M10 bolt?

A 16 mm socket fits an ISO M10 hex bolt.

Is it bad to use a metric socket on an SAE bolt?

A close fit is fine for light work. A loose fit rounds corners over time, so use the exact size when the bolt is tight or the head is worn.

Disclaimer. Reference values for information only. Check the manufacturer's data for your part. Charts & Specs is an independent reference site. It is not affiliated with any manufacturer, standards body or code organization, and it uses brand and standard names only to identify what a value applies to.

Last verified October 5, 2026. How we verify explains our two-source rule and what we leave out.

Sources used on this page
  • Torqbolt
  • Ekinsun Fasteners
  • EngineeringToolbox.com
  • Wermac.org
  • ITA Fasteners
  • reuven.tools
  • mechcodex.com
  • HDBolt