Metric Bolt Size Chart

Metric bolts are named by diameter in millimeters. An M10 bolt has a 1.5 mm coarse pitch, a 16 mm head and takes an 8.5 mm tap drill.

Last verified October 5, 2026

Download PDF
Bolt size lookup

Quick lookup

7/16"

Wrench size for a 1/4 inch hex bolt

Width across flats
0.4375 in (11.11 mm)
Coarse thread
20 per inch
Tap drill
#7

Metric bolt sizes, M3 to M30

ISO 4014 / 4017 widths across flats. Where the older DIN width differs it is shown in brackets.

Bolt sizeCoarse pitch (mm)Hex width across flats / wrench (mm)Tap drill (mm)Close clearance (mm)Medium clearance (mm)Free clearance (mm)
M30.55.52.53.23.43.6
M40.773.34.34.54.8
M50.884.25.35.55.8
M611056.46.67
M81.25136.88.4910
M101.516 (DIN 17)8.510.51112
M121.7518 (DIN 19)10.21313.514.5
M14221 (DIN 22)121515.516.5
M16224141717.518.5
M182.52715.5192021
M202.53017.5212224
M222.534 (DIN 32)19.5232426
M2433621252628
M2734124283032
M303.54626.5313335

Metric fine-pitch options

Fine pitches listed by at least two sources.

ThreadDiameter (mm)Pitch (mm)Tap drill (mm)
M4x0.540.53.5
M5x0.550.54.5
M6x0.7560.755.25
M8x1817
M8x0.7580.757.25
M10x1.25101.258.8
M10x11019
M10x0.75100.759.25
M12x1.5121.510.5
M12x1.25121.2510.8
M12x112111
M14x1.5141.512.5
M14x1.25141.2512.8
M16x1.5161.514.5
M18x1.5181.516.5
M20x220218
M20x1.5201.518.5
M22x1.5221.520.5
M24x224222
M24x1.5241.522.5
M27x227225
M30x230228

How to use this chart

Find the bolt size and read across for the coarse pitch, wrench size, tap drill and clearance drills. A second table lists the fine-pitch options that at least two sources publish. A bolt lists its size and pitch like M10 x 1.5, and the head width is across the flats.

Frequently asked questions

What wrench fits an M10 bolt?

A 16 mm wrench fits the ISO M10 hex head. Older DIN bolts use 17 mm.

What wrench fits an M12 bolt?

An 18 mm wrench fits the ISO M12 hex head. DIN bolts use 19 mm.

What is the pitch of an M8 bolt?

The standard coarse pitch for M8 is 1.25 mm. The fine pitch is 1.0 mm.

What does M8 x 1.25 mean?

M8 is the nominal diameter in millimeters and 1.25 is the distance between thread crests in millimeters.

What is the clearance hole for an M6 bolt?

A close-fit hole is 6.4 mm, a medium-fit hole is 6.6 mm and a free-fit hole is 7.0 mm. See the table for every size.

Disclaimer. Reference values for information only. Check the manufacturer's data for your part. Charts & Specs is an independent reference site. It is not affiliated with any manufacturer, standards body or code organization, and it uses brand and standard names only to identify what a value applies to.

Last verified October 5, 2026. How we verify explains our two-source rule and what we leave out.

Sources used on this page
  • Torqbolt
  • Ekinsun Fasteners
  • EngineeringToolbox.com
  • Wermac.org
  • ITA Fasteners
  • reuven.tools
  • mechcodex.com
  • HDBolt
  • Fabora
  • Drillbitsworld
  • Rivcut
  • Engineering Toolbox
  • CNC Cookbook
  • 6G Tools
  • Turn2Engineering
  • Component Solutions Group
  • Fuller Fasteners
  • Allied Machine & Engineering
  • Bolt Depot