3/8 Bolt Torque

A dry 3/8-16 grade 5 bolt tightens to about 31 ft-lb, and a grade 8 to about 44 ft-lb, at 75% of proof load.

Last verified October 5, 2026

Important. Starting values for general use. Follow the manufacturer's specification for critical joints, wheels and engines.

Download PDF
Bolt torque selector

Starting torque

8 ft-lb

3/8 inch bolt torque, 3/8-16 coarse

Torque = K × diameter × clamp load, with clamp load at 75% of proof load (a reusable joint). K is 0.20 for dry threads and 0.15 for lubricated threads. Proof load is tensile stress area times proof strength: grade 2 at 55 ksi, grade 5 at 85 ksi, grade 8 at 120 ksi, and ISO classes 8.8, 10.9 and 12.9 at 580, 830 and 970 MPa. Stress area is π/4 × (D − 0.9743/TPI)² for inch threads and π/4 × (D − 0.9382 × pitch)² for metric.

Bolt (diameter-TPI)Stress area (in²)Grade 2 clamp load (lb)Grade 2 dry (ft-lb)Grade 2 lubricated (ft-lb)Grade 2 dry (N·m)Grade 2 lubricated (N·m)Grade 5 clamp load (lb)Grade 5 dry (ft-lb)Grade 5 lubricated (ft-lb)Grade 5 dry (N·m)Grade 5 lubricated (N·m)Grade 8 clamp load (lb)Grade 8 dry (ft-lb)Grade 8 lubricated (ft-lb)Grade 8 dry (N·m)Grade 8 lubricated (N·m)
3/8-160.07753,196201527204,940312342316,97444335944

3/8 inch bolt torque, 3/8-24 fine

Bolt (diameter-TPI)Stress area (in²)Grade 2 clamp load (lb)Grade 2 dry (ft-lb)Grade 2 lubricated (ft-lb)Grade 2 dry (N·m)Grade 2 lubricated (N·m)Grade 5 clamp load (lb)Grade 5 dry (ft-lb)Grade 5 lubricated (ft-lb)Grade 5 dry (N·m)Grade 5 lubricated (N·m)Grade 8 clamp load (lb)Grade 8 dry (ft-lb)Grade 8 lubricated (ft-lb)Grade 8 dry (N·m)Grade 8 lubricated (N·m)
3/8-240.08783,623231731235,599352647367,90549376750

How to use this chart

Read across the 3/8-16 coarse and 3/8-24 fine tables for grades 2, 5 and 8. Each row gives clamp load, dry torque and lubricated torque. Lubricating the threads lowers the torque needed to reach the same clamp load.

Frequently asked questions

What is the torque for a 3/8 inch bolt?

It depends on the grade. Dry 3/8-16 values are about 20 ft-lb for grade 2, 31 ft-lb for grade 5 and 44 ft-lb for grade 8, using this method.

What wrench fits a 3/8 inch bolt?

A 9/16 inch wrench fits a standard 3/8 inch hex head.

What size drill do I need to tap 3/8-16?

A 5/16 inch drill is the standard tap drill for 3/8-16.

How many threads per inch does a 3/8 bolt have?

16 for the coarse thread and 24 for the fine thread.

Is 3/8-24 stronger than 3/8-16?

Fine threads have a slightly larger stress area, so a fine bolt carries a bit more clamp load at the same grade.

Disclaimer. Starting values for general use. Follow the manufacturer's specification for critical joints, wheels and engines. Charts & Specs is an independent reference site. It is not affiliated with any manufacturer, standards body or code organization, and it uses brand and standard names only to identify what a value applies to.

Last verified October 5, 2026. How we verify explains our two-source rule and what we leave out.

Metric bolt strength is published two ways. Proof stress, which this page uses, is 580, 830 and 970 MPa for classes 8.8, 10.9 and 12.9 (Andrews Fasteners UK, EngiCalcsHub). Yield strength is a different number, 640, 940 and 1100 MPa (TR Fastenings, EngineeringToolbox.com, Fastener Insight). Older tables also print 640, 900 and 1080 MPa. We label each by what it is.

Sources used on this page
  • Portland Bolt
  • California Fastener
  • Andrews Fasteners UK
  • EngiCalcsHub
  • eFunda
  • MechaniCalc
  • Engineers Edge
  • EngineeringToolbox.com
  • Nordic Fastening Group
  • Optimas