Stainless Steel Gauge Chart
Stainless steel runs a little thicker than standard steel at the same gauge. At 14 gauge, stainless is 0.0781 inch against 0.0747 inch for standard steel.
Last verified October 5, 2026
Quick lookup
3 gauge sheet
- Standard steel
- 0.2391 in (6.07 mm)
- Galvanized steel
- not published here
- Stainless steel
- 0.2500 in (6.35 mm)
- Aluminum
- 0.2294 in (5.83 mm)
Stainless steel gauge chart, 3 to 30 gauge
A gauge number is not one thickness. The same number means a different thickness in steel, galvanized steel, stainless steel and aluminum, so always check which metal a gauge refers to. A dash means the value did not meet our two-source rule. Standard steel is shown beside it so you can see how much thicker stainless runs at the same gauge number.
| Gauge | Stainless (in) | Stainless (mm) | Standard steel (in) | Standard steel (mm) |
|---|---|---|---|---|
| 3 | 0.2500 | 6.35 | 0.2391 | 6.07 |
| 4 | 0.2344 | 5.95 | 0.2242 | 5.69 |
| 5 | 0.2187 | 5.55 | 0.2092 | 5.31 |
| 6 | 0.2031 | 5.16 | 0.1943 | 4.94 |
| 7 | 0.1875 | 4.76 | 0.1793 | 4.55 |
| 8 | 0.1719 | 4.37 | 0.1644 | 4.18 |
| 9 | 0.1562 | 3.97 | 0.1495 | 3.80 |
| 10 | 0.1406 | 3.57 | 0.1345 | 3.42 |
| 11 | 0.1250 | 3.17 | 0.1196 | 3.04 |
| 12 | 0.1094 | 2.78 | 0.1046 | 2.66 |
| 13 | 0.0937 | 2.38 | 0.0897 | 2.28 |
| 14 | 0.0781 | 1.98 | 0.0747 | 1.90 |
| 15 | 0.0703 | 1.79 | 0.0673 | 1.71 |
| 16 | 0.0625 | 1.59 | 0.0598 | 1.52 |
| 17 | 0.0562 | 1.43 | 0.0538 | 1.37 |
| 18 | 0.0500 | 1.27 | 0.0478 | 1.21 |
| 19 | 0.0437 | 1.11 | 0.0418 | 1.06 |
| 20 | 0.0375 | 0.95 | 0.0359 | 0.91 |
| 21 | 0.0344 | 0.87 | 0.0329 | 0.84 |
| 22 | 0.0312 | 0.79 | 0.0299 | 0.76 |
| 23 | 0.0281 | 0.71 | 0.0269 | 0.68 |
| 24 | 0.0250 | 0.64 | 0.0239 | 0.61 |
| 25 | 0.0219 | 0.56 | 0.0209 | 0.53 |
| 26 | 0.0187 | 0.47 | 0.0179 | 0.45 |
| 27 | 0.0172 | 0.44 | 0.0164 | 0.42 |
| 28 | 0.0156 | 0.40 | 0.0149 | 0.38 |
| 29 | 0.0141 | 0.36 | 0.0135 | 0.34 |
| 30 | 0.0125 | 0.32 | 0.0120 | 0.30 |
How to use this chart
Find the gauge number and read the stainless thickness in inches and millimeters. Standard steel is shown next to it so you can see the difference. Stainless gauge tables are less uniform than steel, so check the thickness with calipers when it matters.
Frequently asked questions
What is 16 gauge stainless steel in inches?
0.0625 inch, or 1.59 mm.
What is 18 gauge stainless steel in inches?
0.0500 inch, or 1.27 mm.
What is 14 gauge stainless steel in inches?
0.0781 inch, or 1.98 mm.
Is stainless gauge the same as regular steel gauge?
No. Stainless uses a different table, and the same gauge number is a little thicker in stainless than in standard steel.
What gauge stainless is used for kitchen sinks?
Most are 16 or 18 gauge, and a lower gauge number means a thicker, quieter sink.
Explore the whole Calcs family here.
Tell us which value looks off and we will check it against the sources. Report an issue
Tell us what you looked for. Suggest a chart
Disclaimer. Reference values for information only. Check the manufacturer's data for your part. Charts & Specs is an independent reference site. It is not affiliated with any manufacturer, standards body or code organization, and it uses brand and standard names only to identify what a value applies to.