Sandpaper Grit Chart

Lower grit numbers are coarser. P80 is a coarse sanding grit with a particle size of about 201 microns, P120 is medium at about 125 microns and P220 is fine at about 68 microns.

Last verified October 5, 2026

Download PDF
Grit lookup

Quick lookup

764 microns

P24, extra coarse

CAMI grit
24
Coarseness
Extra coarse
Typical use
Heavy stock removal, paint and rust stripping, rough floor sanding

Sandpaper grit chart, P24 to P4000

Two grading systems are in use. FEPA "P" grades are the European standard and are the ones that line up with a measured particle size. CAMI is the older US coated-abrasive scale. They match closely up to about 220. Above that the systems drift apart and sources disagree, so a dash means we found no agreement and a tilde means the match is approximate.

FEPA P gradeCAMI (US) gritAverage particle size (microns)CoarsenessTypical use
P2424764Extra coarseHeavy stock removal, paint and rust stripping, rough floor sanding
P3030642Extra coarseHeavy stock removal, paint and rust stripping, rough floor sanding
P3636538Extra coarseHeavy stock removal, paint and rust stripping, rough floor sanding
P4040425CoarseFast shaping of wood, removing thick finish, rough metal
P5050336CoarseFast shaping of wood, removing thick finish, rough metal
P6060269CoarseFast shaping of wood, removing thick finish, rough metal
P8080201MediumGeneral smoothing of bare wood, drywall joint compound, removing mill marks
P100100162MediumGeneral smoothing of bare wood, drywall joint compound, removing mill marks
P120120125MediumGeneral smoothing of bare wood, drywall joint compound, removing mill marks
P150150100FineFinal sanding of bare wood before stain or paint, scuffing old finish
P18018082FineFinal sanding of bare wood before stain or paint, scuffing old finish
P22022068FineFinal sanding of bare wood before stain or paint, scuffing old finish
P240—58.5Very fineSanding between coats of finish, light metal prep
P280≈ 24052.2Very fineSanding between coats of finish, light metal prep
P320≈ 28046.2Very fineSanding between coats of finish, light metal prep
P360—40.5Very fineSanding between coats of finish, light metal prep
P400≈ 32035Very fineSanding between coats of finish, light metal prep
P500≈ 36030.2Extra fineWet sanding paint and clear coat, polishing metal and plastic
P600≈ 40025.8Extra fineWet sanding paint and clear coat, polishing metal and plastic
P800≈ 40021.8Extra fineWet sanding paint and clear coat, polishing metal and plastic
P1000≈ 50018.3Extra fineWet sanding paint and clear coat, polishing metal and plastic
P1200≈ 60015.3Extra fineWet sanding paint and clear coat, polishing metal and plastic
P1500≈ 80012.6Ultra fineFinal polishing and compounding
P2000—10.3Ultra fineFinal polishing and compounding
P2500≈ 12008.4Ultra fineFinal polishing and compounding
P3000—≈ 7Ultra fineFinal polishing and compounding
P4000—≈ 5Ultra fineFinal polishing and compounding

How to use this chart

Find the grit and read across for the FEPA P-grade and the average particle size in microns. The P-grade is the European standard used on most sandpaper sold today, and CAMI is the older US scale. For most jobs, start with the coarsest grit that removes the problem, then move through the next grits in order without skipping more than one step.

Frequently asked questions

What grit sandpaper should I use for wood?

Start with 80 to 120 grit to level the surface, then 150 to 180, and finish with 220 grit before staining.

What grit sandpaper should I use between coats of finish?

Use 320 to 400 grit between coats of finish for a smooth surface.

What is the difference between CAMI and FEPA grit?

They are two grading systems. FEPA P-grades are European and CAMI is the US scale. They agree closely up to about 220 and drift apart after that.

Is 120 grit coarse or fine?

Medium. 120 grit is common for general sanding and prep.

Can I skip grits when sanding?

Skip no more than one step. Jumping from 60 grit straight to 220 leaves scratches the finer paper cannot remove.

Why is the CAMI column blank for some grits?

The sources disagree on CAMI values for a few grades above P220, so we left those out rather than publish a guess.

Disclaimer. Reference values for information only. Check the manufacturer's data for your part. Charts & Specs is an independent reference site. It is not affiliated with any manufacturer, standards body or code organization, and it uses brand and standard names only to identify what a value applies to.

Last verified October 5, 2026. How we verify explains our two-source rule and what we leave out.

Sources used on this page
  • Metallography.org
  • Sizes.com
  • Pro-Graad FEPA vs CAMI conversion
  • Fine Tools abrasive grain size comparison
  • Zische grain size table FEPA/JIS/ANSI
  • Beta Diamond Products grit to micron
  • Akasel/Rhaco grit conversion table PDF
  • Metallography.org grit size chart
  • Pro-Graad FEPA vs CAMI
  • Buehler
  • PACE Technologies grit size comparison
  • Whitby Abrasives micron vs P-grade