Nail Sizes Chart: Penny Size, Length and Gauge
Nail size is given in penny (d). A 16d nail is 3-1/2 inches long, an 8d nail is 2-1/2 inches and a 10d nail is 3 inches.
Last verified October 5, 2026
Quick lookup
2d nail
- Length
- 1 in (25.4 mm)
- Typical use
- Small trim, light crafts
- Common nail gauge
- 15
- Common nails per pound
- 850–876
Nail sizes chart: penny size, length and gauge, 2d to 60d
Penny size (written d) names a nail's length. Lengths are fixed; gauge and diameter run slightly differently from maker to maker, and the nails-per-pound counts below are shown as a range across the manufacturers we checked. A dash means the sources disagreed or only one published it, so we left it out.
| Penny size | Length (in) | Length (mm) | Typical use | Common gauge | Common shank (in) | Common per lb | Box gauge | Box shank (in) | Box per lb | Finish gauge | Finish shank (in) | Finish per lb |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2d | 1 | 25.4 | Small trim, light crafts | 15 | 0.072 | 850–876 | — | — | — | 16.5 | — | 1351–1473 |
| 3d | 1.25 | 31.8 | Small trim, lath | 14 | — | 540–568 | 14.5 | 0.076 | 635 | 15.5 | — | 807–880 |
| 4d | 1.5 | 38.1 | Light framing, small boards | 12.5 | — | 285–316 | 14 | 0.080 | 473 | 15 | 0.072 | 584–630 |
| 5d | 1.75 | 44.4 | Light framing, sheathing | 12.5 | — | 250–271 | 14 | 0.080 | 406 | — | — | — |
| 6d | 2 | 50.8 | Sheathing, subfloor edges | 11.5 | 0.113 | 167–181 | 12.5 | — | 236 | 13 | — | 288–309 |
| 7d | 2.25 | 57.1 | Sheathing, siding | 11.5 | 0.113 | 150–161 | 12.5 | — | — | — | — | — |
| 8d | 2.5 | 63.5 | Siding, sheathing, light framing | 10.25 | 0.131 | 100–106 | 11.5 | 0.113 | 145 | 12.5 (S3,S7) or 12 (S6) | — | 189–196 |
| 9d | 2.75 | 69.8 | Siding, sheathing | — | — | — | — | — | — | — | — | — |
| 10d | 3 | 76.2 | Framing, decking, sheathing | 9 | 0.148 | 66–69 | 10.5 | 0.128 | 94 | 11.5 | — | 121–124 |
| 12d | 3.25 | 82.5 | Framing, heavy sheathing | 9 | 0.148 | 61–64 | — | — | — | — | — | — |
| 16d | 3.5 | 88.9 | Framing lumber, the standard framing nail | 8 | 0.162 | 47–49 | 10 | 0.135 | — | 11 | — | 87–93 |
| 20d | 4 | 101.6 | Heavy framing, timber | 6 | 0.192 | 29–31 | 9 | 0.148 | 52–62 | 10 | — | 62–65 |
| 30d | 4.5 | 114.3 | Heavy timber, spikes | 5 | 0.207 | 23–24 | — | — | — | — | — | — |
| 40d | 5 | 127.0 | Heavy timber, spikes | 4 | 0.225 | 18 | — | — | — | — | — | — |
| 50d | 5.5 | 139.7 | Heavy timber, spikes | 3 | 0.244 | 13–14 | — | — | — | — | — | — |
| 60d | 6 | 152.4 | Heavy timber, spikes | 2 | 0.262 | 11 | — | — | — | — | — | — |
Where nail makers disagree
These are real differences between manufacturers, not typos on this page.
- Count per lb is a family of near-miss values, not one number. Four independent-ish manufacturers/catalogs (S1 Maze, S2 Grip-Rite, S3 Iron Wire) cluster within a few percent and all sit below S7 (sizes.com, also Engineering Toolbox). Manufacturer cluster has 3 publishers, S7 cluster 2 pages with one lineage. Show as approximate; do not claim a single value. Manufacturers differ among themselves too (e.g. 4d 285/290/294).
- Common 8d diameter .131 vs .134. Cluster .131 has 4 new independent citations including USDA FPL Wood Handbook and Maze/Iron Wire/Lituo manufacturers (and Grip-Rite retail listing names 8d as 0.131). No new source found for .134. .131 is strongly favoured, but both recorded.
- Common nail diameter cluster B vs A, other sizes. Cluster B (.113/.131/.148/.162/.192/.207/.225/.244/.262) is confirmed by FPL plus manufacturers for 6d-60d.
How to use this chart
Find the penny size and read across for length in inches and millimeters, typical use, and gauge, shank and count per pound for common, box and finish nails. Gauge and diameter differ a little from maker to maker, so the counts per pound are shown as a range. A dash means the sources disagreed or only one published a value, so it was left out.
Frequently asked questions
How long is a 16d nail?
A 16d nail is 3-1/2 inches (88.9 mm) long. It is the standard framing nail.
What does the d in nail size mean?
It stands for penny, an old English name for a nail size. The d is the pence symbol.
What size nail should I use for framing 2x4s?
16d common nails are the usual choice for framing lumber. Check your local code for the nailing schedule.
What is the difference between common, box and finish nails?
Common nails have a thick shank and a flat head for strength. Box nails are thinner to reduce splitting. Finish nails have a small head so they can be set below the surface.
Is a 10d nail the same length as a 3 inch nail?
Yes. A 10d nail is 3 inches long.
Explore the whole Calcs family here.
Tell us which value looks off and we will check it against the sources. Report an issue
Tell us what you looked for. Suggest a chart
Disclaimer. Reference values for information only. Check the manufacturer's data for your part. Charts & Specs is an independent reference site. It is not affiliated with any manufacturer, standards body or code organization, and it uses brand and standard names only to identify what a value applies to.