Rebar Size Chart
Rebar size numbers count eighths of an inch up to #8. A #4 bar is 4/8 inch (0.500 inch) across, with an area of 0.20 square inch and a weight of 0.668 pound per foot.
Last verified October 5, 2026
Quick lookup
Rebar #3, metric #10
- Nominal diameter
- 9.5 mm
- Area
- 0.11 in² (71 mm²)
- Weight
- 0.376 lb/ft (0.560 kg/m)
Rebar size chart, #3 to #18
Standard deformed bar sizes in ASTM A615: #3 through #11, then #14 and #18. Above #8 the bars do not follow the size-divided-by-eight rule, so every row comes straight from the specification tables.
| US bar size | Metric bar size | Nominal diameter (in) | Nominal diameter (mm) | Area (in²) | Area (mm²) | Weight (lb/ft) | Weight (kg/m) |
|---|---|---|---|---|---|---|---|
| #3 | #10 | 0.375 | 9.5 | 0.11 | 71 | 0.376 | 0.560 |
| #4 | #13 | 0.500 | 12.7 | 0.20 | 129 | 0.668 | 0.994 |
| #5 | #16 | 0.625 | 15.9 | 0.31 | 199 | 1.043 | 1.552 |
| #6 | #19 | 0.750 | 19.1 | 0.44 | 284 | 1.502 | 2.235 |
| #7 | #22 | 0.875 | 22.2 | 0.60 | 387 | 2.044 | 3.042 |
| #8 | #25 | 1.000 | 25.4 | 0.79 | 510 | 2.670 | 3.973 |
| #9 | #29 | 1.128 | 28.7 | 1.00 | 645 | 3.400 | 5.060 |
| #10 | #32 | 1.270 | 32.3 | 1.27 | 819 | 4.303 | 6.404 |
| #11 | #36 | 1.410 | 35.8 | 1.56 | 1006 | 5.313 | 7.907 |
| #14 | #43 | 1.693 | 43.0 | 2.25 | 1452 | 7.650 | 11.380 |
| #18 | #57 | 2.257 | 57.3 | 4.00 | 2581 | 13.600 | 20.240 |
How to use this chart
Find the bar size and read across for the metric size, nominal diameter, area and weight per foot. Larger bars do not follow the simple size-over-eight rule, so every row comes from the standard rather than a formula. The nominal diameter is that of a plain round bar with the same weight, not the outside of the ribs.
Frequently asked questions
What is the diameter of #4 rebar?
0.500 inch, or 12.7 mm.
What is the diameter of #5 rebar?
0.625 inch, or 15.9 mm.
What does the number on rebar mean?
For bars up to #8, it is the diameter in eighths of an inch. A #5 bar is 5/8 inch.
How much does #4 rebar weigh?
About 0.668 pound per foot, or about 13.4 pounds for a 20 foot bar.
What is the metric size for #4 rebar?
#13, the soft-metric designation for a 12.7 mm bar.
Why are there no #12, #13, #15, #16 or #17 bars?
The standard skips those sizes. The listed sizes are the ones made and stocked in the US.
Explore the whole Calcs family here.
Tell us which value looks off and we will check it against the sources. Report an issue
Tell us what you looked for. Suggest a chart
Disclaimer. Reference values for information only. Check the manufacturer's data for your part. Charts & Specs is an independent reference site. It is not affiliated with any manufacturer, standards body or code organization, and it uses brand and standard names only to identify what a value applies to.