Pipe Size Finder

The pipe size finder tells you the outside diameter, wall and inside diameter of a nominal pipe size, or the nominal size of a pipe you have measured.

Last verified October 5, 2026

Pipe size finder

Pipe size

1"

How to read the result

Nominal pipe size is a name, not a measurement. In measured-outside-diameter mode the finder lists every nominal size whose outside diameter is within 0.04 inch of your measurement. Pipe, tube and conduit all use different naming, so measure with calipers or wrap a string around the pipe and divide the length by 3.1416.

How to use this finder

Choose what you know. If you know the nominal size, pick the material and schedule and read the dimensions. If you only have the pipe in your hand, switch to measured-outside-diameter mode, enter the measurement, and the finder lists every nominal size within 0.04 inch of it. Measure the pipe, not a fitting, because fittings are larger than the pipe they join.

Frequently asked questions

How do I find out what size my pipe is?

Measure the outside diameter with calipers, or wrap string around it, measure the string and divide by 3.1416. Then enter it in the finder.

What size pipe has a 1.315 inch outside diameter?

It is a nominal 1 inch pipe, in PVC and in steel.

Is copper tube sized the same way?

No. Copper tube is sized by its outside diameter minus 1/8 inch for water tube, and is a different system from pipe.

Why does a 3/4 inch pipe measure over an inch?

Pipe sizes are names, not measurements. A nominal 3/4 inch pipe measures 1.050 inches outside.

Will the finder work for conduit?

Not exactly. EMT and rigid conduit have their own dimensions, so use the conduit fill chart for those.

Disclaimer. Ratings depend on temperature, fittings and installation. Check the manufacturer's current data. Charts & Specs is an independent reference site. It is not affiliated with any manufacturer, standards body or code organization, and it uses brand and standard names only to identify what a value applies to.

Last verified October 5, 2026. How we verify explains our two-source rule and what we leave out.

Sources used on this page
  • Spears Mfg Schedule 40 PVC pipe dimensions
  • Harvel PVC Schedule 40 pipe spec
  • Spears Mfg Schedule 80 PVC pipe dimensions
  • Harvel PVC Schedule 80 pipe spec
  • Georg Fischer PVC Schedule 80 pipe specification
  • Charlotte Pipe PVC Schedule 80 pipe data sheet
  • Charlotte Pipe PVC Schedule 40 pipe data sheet
  • ASME B36.10M (posted copy)
  • ASME B36.19M (posted copy)
  • Engineering ToolBox
  • Baolai Pipes
  • Piping Technology System
  • SJS Enersol